TRENDnet TEG-S50ES, User Manual, Page: 25 / 65

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-S50ES
22
1. From the menu on the left: click on Save, then click the blue button Save
Settings to Flash.
2. Click Continue to return to the Web Configuration of your switch.
Trunk
Configure port trunk settings (Trunk/Link Aggregation)
Network > Trunk
The trunking function enables the cascading of two or more ports for a combined larger
total bandwidth. Only 1 trunk groups may be created, supporting up to 4 ports. Select the
ports to be trunked together, and click Apply to activate the selected trunking groups.
Important Note: Do not connect the cables of a port trunk to the ports on the switch
until you have configured the ports on both the switch and the end nodes. Connecting
the cables prior to configuring the ports can create loops in your network topology.
Loops can result in broadcast storms which can severely limited the effective bandwidth
of your network.
1. Log into your switch management page (see “ Access your switch management page ”
on page 7).
2. Click on Network then click on Trunk.
3. Review the settings. For each trunk group, click Apply to save changes.

Link Aggregation Global Settings: To enable Trunking/Link Aggregation, select
Enable. Otherwise, trunk settings with remain in its default state (Disabled).

For each Trunk ID/Group, check the port numbers to add for each trunk group.