The TE-R2 Ethernet repeaters comply to IEEE 802.3
standard. It enables you to join ethernet cable segments to
extend the length of the network trunk line. It can also be used
to connect more computers to your network. Since there is a
limit on the number of computers allowed on each cable
segment, you can cut the segment into two, and then join
them with an Ethernet Repeater. This will allow more
computers to be added to each network segment.
The TE-R2 Ethernet repeater auto-partitions each port. If a
problem occurs to one of the segments, the TE-R2 will
automatically isolate the segment, therefore will not effect the
operations of the other segments.
TE-R2
2-Port Ethernet Repeater (2 BNC + 2 AUI)
Complies with IEEE 802.3 standards
Support BNC and AUI connections
Automatic partitioning
LEDs for easy troubleshooting
10Mbps transfer rate
5 Year Warranty
FEATURES
PRODUCT INFORMATION
TE-R2
2-Port Ethernet Repeater
(2 BNC + 2 AUI)
TE-R4
4-Port Ethernet Repeater
(4 BNC +4 AUI)
To Order Please Call:
1-888-326-6061
ORDERING INFORMATION
ORDERING INFORMATION
SPECIFICATIONS
Standards:
IEEE 802.3 10Base-2 and 10Base-5
Connectors:
2 BNC and 2 AUI
Dimensions:
441mm x 123mm x 45mm
•
•
•
TE-R2 (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
Email: [email protected]
www.TRENDNET.com
