TREND AIRPRO MAX, User Instructions

Page: 28 / 38

28 SERVICINGN
AIRPRO MAX
Refit new head band in
reverse order as shown on
page
s 17 and 18 ‘ Crown strap
adjustment ’.
Replacing the comfort pads
Brow pad
Remove brow comfort pad by pulling away from the `hook and loop` retaining strip.
Place the new brow pad onto the `hook and loop` strip. Ensure the brow pad is placed
centrally to the front of the headband so that it sits equally left and right to the
user’s
head.
Ensure the `perforated` side of the brow pad is facing the user
’ s skin.
Crown pad
Detach press fasteners from crown comfort pad and remove from headband.
Wrap new crown pad around crown section of headband and secure press fasteners.
Ensure the `perforated` side of the crown pad is facing the user
’ s skin.
Note : To assist with changing the crown pad it may be necessary to remove the
headband. Follow steps 1 and 2 in the section ‘ Crown strap adjustment' on page 17-18
to remove the headband from the respirator frame if required.
Nape pad
Detach press fasteners from nape comfort pad and remove from headband.
Retain nape pad if this is not being replaced.
Place new nape pad, if being replaced, onto headband adjuster and wrap new nape
comfort pad around headband adjuster and secure press fasteners
Ensure the `perforated` side of the nape pad is facing the user
’ s skin.
Figure 30