Trend Micro GateLock, Getting Started Manual

Page: 26 / 85

Trend Micro GateLock Getting Started Guide
3
-
6
F
IGURE
3-5. Metered xDSL information screen
Note: Select Metered xDSL if your ISP has given you a user name and a password. You must
use GateLock’s setup screens to specify this information so that it can be recognized
by GateLock.
WARNING! When using GateLock with Metered xDSL, always remember to disconnect your
Internet connection using On-Demand Connection on GateLock’s configuration
console. You will stay connected to the Internet even if you turn off your PC as
long as GateLock is on. You will only be automatically disconnected when the
maximum idle time you have specified is reached.
Static IP Address
If you select the Static IP address option:
1. Type the required information in the blank fields on the screen that appears after
you click Start. See Figure 3-6.
• IP address: Type the IP address given to you by your ISP.
• Subnet mask: Type the Subnet Mask address given to you by your ISP.