Trend Micro™ Network VirusWall™ Enforcer 1500i (CR100 Series) Installation and Deployment Guide
2-8
F
IGURE
2-5.
Installing and removing the bezel
To install the bezel:
1.
Hook the right end of the bezel into the bezel slot on the right side of the device
front plate
2.
Rotate the other end of the bezel toward the front panel and press the bezel onto
the panel to engage the latch.
3.
Lock the bezel.
To remove the bezel:
1.
Unlock the bezel.
2.
Unlatch the left end of the bezel and rotate it away from the front panel.
3.
Unhook the right end of the bezel and pull the bezel away from the device.
1
Keylock
2
Bezel
2
1
