TREND MICRO
TM
Cloud Edge 50 G2
Routing Mode/Bridge Mode
Examining the Cloud Edge Gateway
2
Cloud Edge Gateway Front Panel
Cloud Edge Gateway Back Panel
Deployment Modes
3
Power cord
Opening and Inspecting the Carton
1
Documents
AC adapter
Cloud Edge gateway
Serial cable
Deployment Checklist
4
1. Toggle the switch on the back panel as needed.
2. Connect the Cloud Edge gateway to a power source.
3. Power on the Cloud Edge gateway.
Setting up the Hardware
5
Power
Bridge
Routing
Reset
1. Connect the WAN port to a wide area network (i.e. Internet).
2. Connect the LAN1 port to a switch on your internal network.
3. Connect the MGMT port to the management laptop.
Connecting to the Network
6
Ethernet cable
Requirement
Details
Laptop with the following:
Adobe™ Flash™ 10 or later
Supported web browser
•
Firefox™ 70 or later
•
Google™ Chrome 78 or later
•
Internet Explorer™ 11
Laptop with Ethernet port
Bridge Mode:
Your network DNS server IP addresses
Routing Mode:
Your network DNS server IP addresses if not assigned by ISP
DNS settings
Bridge Mode:
Internal address for virtual interface: DHCP or Static (IP address,
netmask, and gateway)
Routing Mode:
External address for WAN: DHCP, Static, or PPPoE
(user name/password)
Internal address for LAN1: DHCP or Static
IP addresses (1-2)
Connect to MGMT, WAN, and LAN1 ports.
Ethernet cables (3)
Mode
Description
Gateway acts as a transparent layer 2 device, providing scan and threat protection
without interrupting traffic flow. Does not require client, router, or switch modifications.
Bridge
Gateway is visible on the network and acts as a layer 3 routing device with traffic
scanning and control capabilities.
Routing
Internal
Switch
AC Adapter
100 - 240V AC
Internet
Management
Laptop
Routing Mode
Internal
Switch
AC Adapter
100 - 240V AC
Internet
Internet
Modem/Router
Internet
Modem/Router
Management
Laptop
LAN/
Ethernet
Bridge Mode
Trend Micro Cloud Edge is a security solution for MSPs (Managed Service Provider) that
combines on-premises and cloud-based security features. Deploy your Cloud Edge 50 G2
on-premises and the MSP can remotely manage your network through the cloud.
The recommendation is to choose Bridge Mode whenever possible. You would typically
use a Bridge Mode deployment on a private network behind a router and in front of a
switch. Configure Routing Mode when you want the Cloud Edge gateway to function as a
router as well as providing security and threat protection.
For more information about deployment, see
http://docs.trendmicro.com/en-us/smb/cloud-edge.aspx
Cloud Edge 50 G2
Power
Bypass
Storage
Reset
Cloud Console
connected
MGMT LAN3 LAN2
WAN1
WAN2
& LAN1
Cloud Edge 50 G2
Power
Bypass
Storage
Reset
Cloud Console
connected
MGMT LAN3 LAN2
WAN1
WAN2
& LAN1
RS-232
USB
WAN1
WAN2 & LAN1
LAN2
LAN3
MGMT
Power
+12V DC
Bridge
Routing
Reset
Router
WLAN
Internet
Switch
...
Cloud Edge
Cloud Edge
Bridge Mode
WAN
LAN
192.168.1.x
...
Switch
Cloud Edge
Cloud Edge
Routing Mode
WLAN
Internet
