TREND MICRO
TM
Cloud Edge 100 G2
Routing Mode/Bridge Mode
Trend Micro Cloud Edge is a next generation security solution for MSPs (Managed
Service Provider) that combines on-premises and cloud-based security features. Deploy
your Cloud Edge gateways on-premises and the MSP can remotely manage your
network through the cloud.
Deployment Modes
3
Opening and Inspecting the Carton
1
Verify that the Cloud Edge gateway carton contains the following items:
Deployment Checklist
4
1. Toggle the switch on the back panel as needed.
2. Connect the Cloud Edge gateway to a power source.
3. Power on the Cloud Edge gateway.
Setting up the Hardware
5
Power
Bridge
Routing
Reset
1. Connect the WAN port to a wide area network (i.e. Internet).
2. Connect the LAN1 port to an internal endpoint (Bridge Mode) or an internal
network (Routing Mode).
Connecting to the Network
6
Requirement
Details
Connect a laptop to the MGMT port. Connect the WAN port, which
serves as an uplink to the Internet, to the upstream side of the
network.
Bridge Mode:
Connect the LAN1 port to an internal endpoint.
Routing Mode:
Connect the LAN1 port to an internal network.
Bridge Mode:
Obtain information for one internal address (sw0), either DHCP or
static (IP address, netmask, and gateway).
Routing Mode:
Obtain the information about connecting to the WAN from your
Internet Service Provider (ISP): DHCP, Static, or PPPoE.
Obtain IP address information for the LAN1 connection (Static).
Bridge Mode:
Your network DNS server IP addresses.
Routing Mode:
Use either automatic DNS settings assigned by the ISP’s DHCP or
obtain your network DNS server IP addresses.
A computer that has the following software installed:
Adobe™ Flash™ 10 or later
Supported web browser
Firefox™ 61 or later
Google™ Chrome 68 or later
Internet Explorer™ 10-11
Ethernet cables (3 cables)
IP addresses (1-2
addresses)
DNS settings
Laptop with Ethernet port
Mode
Description
The Cloud Edge gateway acts as a transparent layer 2 device, providing scan and threat
protection without interrupting traffic flow. In addition, the gateway functions as a
hardware switch with a WAN port that provides the uplink to the Internet and seven LAN
ports that can be connected directly to endpoints such as clients, servers, and Wi-Fi
access routers.
The Cloud Edge gateway is visible on the network and acts as a layer 3 routing device
with traffic scanning and control capabilities.
Bridge
Routing
AC Adapter
Endpoint
100 - 240V AC
Internet
Modem/Router
Bridge Mode
Router
Internet
WAN
LAN1
LAN2
LAN3
LAN7
...
Cloud Edge
Cloud Edge
...
...
Bridge Mode
LAN
...
Switch
Cloud Edge
Cloud Edge
Routing Mode
WLAN
Cloud Edge 100 G2
WAN
MGMT
Reset
Cloud Console
Connected
LAN8 LAN7 LAN6 LAN5 LAN4 LAN3 LAN2 LAN1
WAN
Cloud Edge 100 G2
WAN
MGMT
Reset
Cloud Console
Connected
LAN8 LAN7 LAN6 LAN5 LAN4 LAN3 LAN2 LAN1
Internet
Internet
Management
Laptop
AC Adapter
100 - 240V AC
Internet
Routing Mode
Management
Laptop
Internal
Switch
Power Cord
Opening and Inspecting the Carton
1
Documents
AC adapter
Cloud Edge Gateway
Serial cable
Verify that the Cloud Edge gateway carton contains the following items:
Ethernet cables (2)
Examining the Cloud Edge Gateway
2
Cloud Edge Gateway Front Panel
Cloud Edge Gateway Back Panel
