17
EN
minipool
Phantom
PR1
First run
The function can always be activated, even if the water
level is low.
6
“OK”
If pressed for more than three seconds, you access
a submenu page where other system functions are
available (empty, keypad lock, SILENCE mode).
When accessing special functions, the "KEYPAD
LOCK" icon is always lit by default.
To scroll through the various functions, press the "
+
"
and "
-
" keys. When the icon of the desired function
lights up, press the "
OK
" key to activate it.
After six seconds of inactivity the display exits the sub-
menu and returns to showing the water temperature.
7
DRAIN
The emptying of the minipool can be activated at any
time.
To activate it:
A
Press the "OK" key
6
for at least three seconds.
B
this provides access to a submenu page.
C
Use the
+
and
-
keys until the “DRAIN”
7
icon is illuminated and press the “OK” key
6
to
activate it.
The display shows the
icon throughout the
entire emptying operation.
Emptying lasts 120 minutes and for the entire dura-
tion the bathtub needs to be powered to allow it to
completely drain all residual water from the tank pipes
and filter. During emptying, the blower is automati-
cally activated to drain the airpool system pipes.
During emptying of the minipool, the only enabled
function is chromatherapy.
To stop the emptying test, disconnect the power
supply to the bathtub for about 30 seconds.
8
KEYPAD LOCK
Activation of this function will not allow the tempera-
ture set point to be changed, while the whirlpool,
blower and chromatherapy functions will remain ac-
tive.
To activate it:
A
Press the "OK" key
6
for at least three seconds.
OK
OK
3”
1
7
9
8
10
2
5
3
6
4
Submenu
page
Main page
B
this provides access to a submenu page.
C
T
he i
con
“KEYPAD LOCK”
8
is illuminated, press
the “OK” key
6
to activate it.
When the function is activated, the display will show
the word "LOCK" for six seconds and then return to
showing the water temperature.
To disable the function, press the "OK" key again for
three seconds and then press the "KEYPAD LOCK"
key
8
again.
9
MANUAL BACKWASHING - ICON NOT ACTI-
VATED
This function is not available in Phantom minipools,
so the icon is deactivated.
10
SILENCE MODE (SILENT HOURS)
This function provides access to a page where the
hours of the day can be specified during which the
control enters SILENCE operating mode (silent hours),
when all the automatic activations of the pumps and/
or blowers are inhibited and only the antifreeze safety
function remains active.