16
EN
minipool
Phantom
PR1
2
FIRST RUN
With the bathtub full, recirculation active and ozone ac-
tive, start in sequence all the functions of the bathtub in
the presence of the owner to verify proper operation:
1
BLOWER
The minipool can be equipped with a blower motor
that drives the nozzles on the bottom;
Pressing the
1
key starts the nozzles on the seat
(default duration 20 minutes).
The blower function on the seat can be started even
if the whirlpool is running.
When the
1
key is pressed again, the blower func-
tion stops, the key returns to white and the tempera-
ture is shown again on the display.
If not stoppedmanually , the function stops automati-
cally after 20 minutes.
2
PERIMETRAL PLUS WHIRLPOOL
Pressing the
2
key activates the
PLUS whirlpool
function on the lumbar area
and the corresponding
key turns blue.
The
icon appears on the display for six seconds
and then is replaced by the temperature. When the
key is pressed again, the whirlpool function stops, the
key returns to white and the temperature is shown
again on the display.
If not switched off manually, the function stops auto-
matically after 20 minutes.
3
PERIMETER WHIRLPOOL (BACK AND LEGS)
The whirlpool is divided into two areas: one on the
back and one on the legs.
The functions can only be activated when the
water level is sufficient. When EMPTYING, the
whirlpool is deactivated.
Pressing the
3
key activates the
whirlpool function
on the back and legs
and the corresponding key
turns blue. The
icon appears on the display for
six seconds and then is replaced by the temperature.
When the key is pressed again, the whirlpool function
stops, the key returns to white and the temperature
is shown again on the display.
If not switched off manually, the function stops auto-
matically after 20 minutes.
4
WATER TEMPERATURE ADJUSTMENT
When one of the two keys
+
or
-
is pressed once,
the display shows the current setting (default 35°C) and
the two keys are illuminated with a strong blue light.
From the second press on, the displayed value is
increased or decreased by one degree at a time
depending on the key pressed (range from 15°C to
40°C).
After six seconds of inactivity with the keys or if an-
other key is pressed, the adjustment function will end
and the two keys will return to white, memorising the
First run
new setting.
The function will activate the heater (flashing degree
character) with the objective of heating and maintaining
the water temperature at the set value (+/- 0.5°C).
5
CHROMATHERAPY
Pressing the light
5
key will activate a sequence of
16 colours that will vary in an automatic intermittence
(for 2 hours by default):
the light
5
key and the
+
and
-
keys turn blue and the symbol
+
will ap-
pear on the display for 6 seconds.
During this time you can press the
+
or
-
key to
manually select a colour that you want to remain fixed:
the light key
5
will remain blue, while the
+
and
-
keys will turn white again: at this time it is no longer
possible to change colour.
To once again manually select the colour, press the
light key
5
again and select the desired colour within
six seconds with the
+
or
-
key.
Once you have selected a fixed colour, to return to the
automatic sequence you must turn off and reactivate
the function.
To stop the function hold the
key pressed for
about three seconds. The key will turn white again
and the temperature will reappear on the display.
OK
OK
3”
1
7
8
9
10
2
5
3
6
4
Submenu
page
Main page