Step #
8
Place the end of the Exit Chute up against the last Elbow Section and make it level with
the ground. If any of the last Elbow bolt holes line up with the Exit Chute attach with
Bolts and Washers (possibly 2 Places). For all the holes that don't line up attach with Lag
Screws and Washers. (as many as 12 places) Start each Bolt by hand before tightening.
Be careful not to overtighten the Lag Screws into the soft plastic.
Lag Screws
& Washers
Hex Bolts & Washers
(if possible)
Rest on ground
