Tree Frogs PARROT ISLAND PLAYCENTER Base Manual Download Page 1

Page: 1 / 57

Tools Needed for Assembly

Tape Measure

24” Level

Angle Square

Phillips Screw Driver

3/8” Cordless Drill or Electric Drill 3/8” Drive Ratchet or Electric Impact Gun

Claw Hammeror Rubber Mallet Pliers or Vise Grips

7/16” Deep Well Socket

9/16” Deep Well Socket

3/4” Deep Well Socket

1/8”, 1/4”, and 9/16” Drill Bits

Phillips Head Screw Bits

An Adult with two Adult Helpers

Please familiarize yourself with the install manual, parts/components and general construction process of your new swing set before

getting started. Approximate assembly time: 6 to 8 hours. 6 foot unobstructed safety perimeter around swing set recommended.

PARROT ISLAND PLAYCENTER

BASE MANUAL

Version 4.15

Summary of Contents for PARROT ISLAND PLAYCENTER


























































Search results

Summary of Contents for PARROT ISLAND PLAYCENTER

Reviews:

Related manuals for PARROT ISLAND PLAYCENTER

Brands by name

Popular brands

Tree Frogs PARROT ISLAND PLAYCENTER, Base Manual

Search results

Summary of Contents for PARROT ISLAND PLAYCENTER

Reviews:

Related manuals for PARROT ISLAND PLAYCENTER

Brands by name

Popular brands