19
INITIAL OPERATION
Place the blanket flat ensuring that it does not overhang anywhere.
Avoid that the blanket can get folded or crumpled. The blanket may
only be switched on when it is flat and unfurled. It is recommended to
preheat it for about 5-15 minutes.
Once the electric blanket has been installed correctly in position, connect
the controller supply plug to a suitable power outlet. Ensure the controller
is set to Off. Switch the power on. Select the desired heat setting on the
controller. The indicator lamp on the switch indicates that the blanket is
ON.
Only operate the blanket with the supplied switching unit model.
CAUTION: The electronic components inside the switch may lead to a
slight warming of the switch when the product is on. Therefore the
switch must not be covered or placed on top of the warming pad when
it is in operation.
USING THE ELECTRIC HEAT BLANKET
The parts
Electric blanket
Controller
