SS40 SURGE OPERATION / MAINTENANCE MANUAL
PAGE 3
1
INSTALLATION
1.1 UNPACKING
After unpacking, the surge suppressor should be checked for any damage that
may have occurred during shipment. Damage should be reported to the carrier
immediately.
The following items should be included within the shipping container:
Qty
Item
Description
1
SS40
SS40 Surge Suppressor
1
MSS40
Operation/Maintenance Manual
1
Fitting
3/8” Male Branch Tee
2’
Tubing
3/8” PE Tubing
1
**
Seal, Port
**Dependent upon type of pump option selected.
1.2 LOCATING / MOUNTING SURGE
•
Remove port plug from pump.
•
Install new port seal.
•
Hand tighten surge suppressor into port.
Do not
over tighten.
ATTENTION:
Over-tightening adapter into pump will result in pump damage.
