1.3 Device Control
47
1.3.14. Settings of NIBP Module
Set the units of BP measurement, the measurement period of the NIBP module and select au-
tomatic or manual modes of blood pressure measurement by clicking on the corresponding
fields in the window of the NIBP channel:
Default values: BP measurement interval
– 5 min, units – mmHg.
To turn on / off the automatic measurement mode, press the "
--- / ON
" button in the window of
the blood pressure measurement interval. In the manual mode dashes are displayed in this
field.
When the automatic BP measurement mode is turned on, the counter value of the BP meas-
urement period is additionally displayed in the NIBP channel window, and the symbol "P" (man-
ual) is replaced by "A" (automatic) on the measurement start icon:
To start NIBP measurement (including for the first measurement in automatic mode), click on
the start icon:
To interrupt the NIBP measurement in progress, click on the stop icon:
In this case only the current measurement is interrupted and, if the automatic measurement
mode is set, the next measurement will be performed after the set period of automatic NIBP
measurement.
Setting of the BP measure-
ment interval
Changing of the units of
measurement mmHg / kPa
(optional)
Summary of Contents for MPR6-03
Page 1: ...Patient Monitor MPR6 03 User Manual RM 501 01 000 01 01 UM Version 7 05 2020 ...
Page 2: ...2 ...
Page 193: ...193 ...
