Download the TreatLife APP
1. Register or Log In
Scan the QR code to download the “TreatLife"
APPlication.
Tap “Register” to create an account.
Enter your phone number to get a verification
code and create a password. Or, choose “Log
in" if you already have a TreatLife account.
Please scan the QR code or download the TreatLife
APP on the APP Store or Google Play.
正面
On/Off
Button
Indicator light
On/Off: White
WiFi Pairing: Red
Note: This plug only supports 2.4Ghz networks.
If you are connected to a 5Ghz network, please
switch to the 2.4Ghz Network
Note: Please log in with your TreatLife account.
2. Configure the APP to the Plug
Preparation: Ensure the Pulg is connected to
power; Ensure your phone is connected to your
WiFi router and is able to connect to the
internet.
1. EZ Mode (Manual Mode)
2. AP Mode
1. Default Mode (EZ Mode)
Click the “+" symbol in the upper right corner of
the device list, and select “Smart Plug (WiFi)” in
“Electrician” options.
Press and hold the on/off button for 5 seconds
until the red indicator light blinks rapidly.
Note: Please complete the pairing process
within 3 minutes after the plug is reset.
Note: please use one of the following pairing
methods if the automatic mode above did not
work.
First, plug in the device and ensure it is
receiving power.
Press and hold the power button for about 5
seconds then confirm the indicator light is
blinking rapidly.
Open the “TreatLife” APP and it will find the
plug automatically. Select the “Smart Plug
(WiFi)” in the “Electrician” options.
If the plug is not automatically discovered, click
the “+" at the top right of the plug list and
select Auto Scan to automatically search for
the plug.
Follow the steps in the APP to complete the
plug pairing.
Plug Pairing
Click the “+" symbol in the upper right corner of
the device list, and select “Smart Plug (WiFi)”
in “Electrician” options.
Tap “AP Mode"on the top right corner.
Press and hold the on/off button for 5 seconds
until the red indicator light blinks rapidly. Then
press and hold for 5 seconds again until the
indicator light blinks slowly.
Tap “Confirm indicator slowly blink”
Follow the APP steps to complete the plug
pairing.
Tap “Confirm indicator rapidly blink";
Enter your Wi-Fi Password; Wait for the plug to
complete the connection. Devices have added
successfully.
If you can not configure the plug successfully
with the default mode, please try to connect with
AP Mode.
Go to TreatLife> >More for instructions to link
Alexa/Google Assistant.
Link TreatLife to Alexa / Google Assistant
Specifications
Input Voltage
Max Output
Operating Temperature
Wireless Frequency
Wireless Standard
Supported Operating
Systems
120V AC/60Hz
1800W
-5°C～45°C(~23℉~113℉)
2.4GHz
IEEE802.11 b/g/n
Android 4.1 and above
or iOS 8.0 and above