background image

Cycle Complete
         (solid)

NiMH/LiPO FAST CHARGER INSTRUCTIONS

Covers Part #2971

Thank you for purchasing the Traxxas EZ-Peak Live™ charger.  
This charger features exclusive Traxxas innovations that make 
charging batteries easier and safer than ever. If you have any 
questions or concerns about your charger, please contact our 
customer support team for fast, friendly answers and solutions.  
Contact information is at the bottom of this page. 

WARNING! 

For best charging results and your safety, it is 

essential that you read and understand these instructions, 
warnings, and precautions before using the charger. Charging 
and discharging batteries has the potential for serious injury 
and damage to property. Use care when charging and follow all 
instructions and cautions.

iD Logo

Battery Type

Traxxas High-Current 

Connector

1. Plug the charger into an AC wall outlet and connect the battery

2. Verify the charge settings

Charging Traxxas iD NiMH Batteries 

Battery type selected must match the battery type shown on the battery.

The charger will recognize the iD battery 
and show you the charge settings.

HKC16014-R00    160818

TRAXXAS.com

Traxxas, 6250 Traxxas Way, McKinney, TX 75070,

 

Phone: 1-888-TRAXXAS (Toll-free, US only) or 972-549-3000, Fax: 972-549-3011, e-mail: [email protected]

3. Charging

Press and hold the Start button 
for 2 seconds. The charger will 
play a tone, indicating that 
charging has started. Press once 
to stop. The charger will play a 
tone, indicating that charging 
has been canceled. The charge 
progress LEDs will light as the 
battery charges.

4. Charge cycle complete

Identifying iD Batteries   

LiPo battery shown, NiMH battery similar

A.  Battery iD Start/Stop
B.  LiPo Charge Mode Select
C.  App Live LED
D.  Charge Status LED

A

B

C

F

G

D

E

Charge

Status

Charge

Progress

E  Charge Progress LEDs
F.   Charger Output Port (Traxxas High-Current Connector)
G.  2S/3S/4S Lipo Balance Ports (pull to remove cover)
H. 

Bluetooth®

 Button

Battery Type

Start

Charging
(flashing)

Charge Cycle Progress

The charger will play a complete tone, followed by a beep to indicate 
charging is complete.
The EZ-Peak Live will trickle charge your NiMH battery at a minimum of 
100mA for 12 hours after the charge cycle is complete.

H

Intelligent battery charger

2971

Summary of Contents for ez-peak live 2971






Reviews: