Small Flush Wood Wilmington Face
Installation Instructions
96300207
Page 1 of 4
17601808.docx — 9/23/13
© Travis Industries, Inc.
Compatibility
•
Small Flush Wood Insert – Arched
Face Sizing
NOTE: The small flush wood insert may be installed with a face and no surround panel. The face is 30”
wide and 21.5” tall.
Packing List
•
Wilmington
Face
•
Ashlip
•
(2) ¼-20 x 1” Bolts
Attaching the Ashlip to the Face
1
Place the face a non-scratching surface (front side upwards). Take care to prevent damage to the
mounting brackets or the wiring from the rheostat. Before installing the ashlip, make sure the center
clip is slightly loose (when tightened, it will secure the center of the ashlip to the face).
2
Place the ashlip in position and secure using the two included bolts (7/16” wrench).
Make sure the center
clip is slightly loose.
