Optional Equipment (for authorised installers only)
39
© Travis Industries
4120309
100-01287_000
LP Conversion Instructions
Convert the appliance prior to installing the gas line to ensure proper gas use.
1. Remove the glass (see page 22).
2. Remove and discard the manifold cover (see below).
3. Follow the directions below to replace the orifices (NOTE: Orifice sizes are listed in DMS).
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
c
Look here for the orifice identification
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Front
Rear
NG
#49
#43
LP
#57
#53
b
1/2" Wrench
Use a 1/2" open end wrench
to unscrew the two orifices.
Front Burner Orifice
a
Rear Burner Orifice
15/16"
24mm