Page 1 of 12
17602034- 7/11/19
© Travis Industries, Inc.
Compatibility
ProBuilder 36 Clean Face
564 25K (Standard or CleanFace)
Packing List
• (1) Convection Manifold (with grill and mounting brackets pre-attached)
• (2) 5” Diameter Aluminum Flex Ducts
• (2) Starter Collars
• (12) Self-Drilling Tek Screws
• (2) Convection Air Deflectors (Used for the PB 36 ONLY – see below)
Convection Air Deflectors- ProBuilder 36 CF ONLY
The 2 deflectors must be installed prior to attaching the CoolSmart kit. After removing the cover plates, install the
deflectors as shown below.
Grill and Manifold Dimensions
The grill may be installed over the facing to
provide an aesthetic opening for the
convection outlet. (2) 8-32 x 1-1/2” screws
attach the trim to the upper manifold. This
allows variable thickness of finish material.
Dimensions
a
b
c
d
e
35-7/8” (912mm)
2-7/8” (74mm)
1-1/4” (32mm)
34-7/8” (886mm)
1-3/4” (45mm)
Deflectors are installed here.
Note how the
deflectors points
downward to the
rear.
PB 36 & 564 25K CoolSmart TV
(sku# 98900778)
564 25K NOT AVAILABLE IN AUSTRALIA
