3615/4415/6015 Trim Kit Installation
See SKU’s Below
Page 1 of 4
17601847 - 5/7/14
Travis Industries, Inc.
Compatibility / Sizing / SKU’s
4415 – First 315 Units ARE NOT COMPATIBLE
4415 fireplaces, serial number 3212-000001 through 3212-000315 are not compatible with the trim kit (the
firebox opening was not wide enough).
4415 – Early Units REQUIRE NEW CONCEALMENT COVER
4415 fireplaces, serial number 3212-000316 through 3212-000883 used a concealment cover that is too wide
for the 4415 trim kit. If you have one of these units, contact Travis Industries to receive a revised concealment
cover (part # 250-03302).
In addition, you will need to widen the two ledges the concealment cover rests on inside the fireplace. Use a
screwdriver to widen the ledge as shown below.
Before
After
Minimum Facing Depth
Maximum Facing Depth
SKU
3615 Standard Facing Kit
1/2”
7/8”
95900388
3615 Thick Facing Kit
1”
1-1/2”
95900390
4415 Standard Facing Kit
1/2”
7/8”
95900392
4415 Thick Facing Kit
1”
1-1/2”
95900394
6015 Standard Facing Kit
1/2”
7/8”
95900396
6015 Thick Facing Kit
1”
1-1/2”
95900398
Packing List
(2) Side Pieces
(2) Top/Bottom Trim Pieces
L Bracket Hardware (4 L Brackets with 2 Set Screws Pre-Installed, 4 L Spacers)
(4) 8-32 x 3/8” Screws
(2) Top Trim Clamps
