Traub TNX65/42, Installation Instructions Manual, Page: 9 / 66

9
14.03.2022
TNX65/42
General hazards during on-site transport
Danger to life!
Do not step under suspended loads.
Machines must be transported by authorized and qualified personnel only.
Act responsibly when transporting the system and always consider the conse-
quences. Avoid dangerous and risky actions.
Slopes and gradients (driveways, ramps, etc.) are particularly dangerous. Use
extra care if such passageways cannot be avoided.
Ensure secure and proper seating of the cargo. If necessary, use additional
fixtures to ensure that the cargo is not able to slip.
The transport vehicles must be able to produce sufficient traction and braking
forces for safe transport.
Dimensions and masses
The machine and control cabinet masses are indicated on the respective ma-
chine installation plan.
The masses of optional separate units, such as chip conveyor, bar feeder, bar
loading magazine, and similar devices, can be found either in the specific trans-
port instructions/manufacturer documentation for these equipment levels or
accessories or in the corresponding machine installation plan.
Transporting and lifting aids
For lifting and transporting the individual units, only lifting and transporting aids
having sufficient capacity and loading platform must be used.
Safety