Traub TNX65/42, Installation Instructions Manual, Page: 8 / 66

8
14.03.2022
TNX65/42
Information on transport, installation, commissioning
Use only suitable hydraulic jacks, cranes, or forklift to lift
the machine. When transporting with transport or armored
rollers, ensure that the rollers used have the appropriate
load-bearing capacity.
Failure to follow proper procedures for transport, installation and, start-up is
prone to cause accidents and may induce damages to or malfunctions of the
machine for which
INDEX TRAUB
rejects any liability or warranty.
Prior to delivery of the machine, the procedures for unloading, transporting to
the installation site, installation, and start-up must be carefully planned while
absolutely observing the cautions below in this document.
Associated transport instructions and/or manufacturer documentation exist for
separate units such as chip conveyor, bar feeder, bar loading magazine, and
similar devices that must be observed as well.
Safety