Traub TNX65/42, Installation Instructions Manual, Page: 16 / 66

16
14.03.2022
TNX65/42
Space requirements
The following must be ensured:
– Sufficient free space around the machine.
– Sufficient movement space for the operator.
– Sufficient space for maintenance and repair.
– It must be possible to open all doors of the machine completely.
– Space for placing blank and workpiece pallets, workpiece collectors, chip
trolleys, tool trolleys, etc.
Use the machine installation plan to determine the required space.
There are special installation plans for add-on equipment such as bar feeders,
bar loading magazines, etc.
Floor condition
A special foundation is not necessary. Only the load capacity and strength of
the floor area must be suitable for the machine weight based on constructional
aspects.
Comply with the requirements set out in DIN 18202:2019 .
In particular, note the information regarding “Flatness tolerance
for finished floors” .
There must be no expansion joints in the area of the machine
footprint.
The locally valid guide lines and regulations must be taken into con-
sideration.
Les différentes directives et prescriptions en vigueur dans le pays
d’utilisation devront être prises en compte.
Devono essere rispettate di volta in volta le direttive e le prescrizioni
vigenti nel paese di utilizzo.
De gällande riktlinjerna och föreskrifterna i användningslandet måste
följas.
Han de observarse las directivas y prescripciones vigentes del país
de destino.
Devem ser consideradas as recomendações e regulamentos do res-
pectivo país.
Käyttömaassa voimassa olevia direktiivejä ja määräyksiä on noudatet-
tava
Je nutno dodržovat také aktuální směrnice a předpisy platné v zemi
použití.
Należy uwzględnić też obowiązujące dyrektywy i przepisy kraju użyt-
kownika.
Se vor respecta normele şi directivele în vigoare în ţara de destinaţie.
Figyelembe kell venni a felhasználó ország mindenkor érvényes irány-
elveit és előírásait.
Met de geldende richtlijnen en voorschriften van het gebruiksland
moet rekening gehouden worden.
Der skal tages hensyn til de pågældende gældende direktiver og
forskrifter i brugslandet.
Musíte dodržiavať smernice a predpisy práve platné v krajine používa-
nia.
必须对所在国家各现行指令和规定加以考虑。
Es müssen die jeweils geltenden Richtlinien und Vorschriften des
Verwendungslandes berücksichtigt werden.
Ürünün kullanıldığı ülkede geçerli olan direktifler ve yönetmelikler
dikkate alınmalıdır.
Upoštevati je treba direktive in predpise, ki so veljavni v posamezni
državi.
Необходимо учитывать соответствующие действующие директи -
вы и предписания страны, в которой применяется ресивер.
02
en
03
fr
04
it
05
sv
06
es
07
pt
08
sl
09
fi
01
de
11
tr
10
ru
12
cs
13
pl
15
ro
16
zh
19
hu
20
nl
21
da
23
sk
Трябва да се вземат под внимание действащите в съответната
страна директиви и разпоредби.
14
bg
Fastening/anchoring
In any case, the machine must be doweled to the floor.
Bar guides, bar feeders, and bar loading magazines must be anchored to the
floor.
When attaching a robot cell from a third-party manufacturer, be sure to observe
the relevant manufacturer’s documentation.
General information