Traub TNL20, Operating Instructions Manual

Page: 60 / 74

60
Transport and installation
TNL20
DTE022DE - 24.06.2021
Installing configuration levels and additional equipment
Fitting of the chip pan (optional)
The chip pan is fitted onto the machine from the left as standard.
Fitting from the right is possible (custom installation). Special actions
might be needed in the area of the bar loading magazine.
• Fitting the chip pan
From the left
(standard)
Installation can also be with the cover and spacer plate (a) fitted provided
other fittings are provided on the left.
The cover and spacer plate (a) is fitted from above with 4 butterfly screws.
a
From the right
(custom installation).
Special actions might be needed in the area of the bar loading magazine.
The cover and spacer plate is not fitted.
• Push the chip pan in all the way.
• Adjust the feet by the same amount until the gap between the machine and
chip pan is 2 mm all the way round
1.
2.
2.
1.
3.
3.