Traub TNL20, Operating Instructions Manual

Page: 53 / 74

53
Transport and installation
TNL20
DTE022DE - 24.06.2021
Installation of the machine
Removing the transport locks and drip pan from the machine
All transport locks and the drip pan must be removed before install-
ing chip conveyor or before commissioning the machine.
For the locations of the transport locks, see Chapter
“Preparing the
machine for transport” .
Removing the transport lock, P/N 11096850
During removal, all screws of the transport lock must be removed.
After removing the transport locks and drip pan, they should be stored in a safe
place so that they can be reused (e.g., when transporting the machine again or
for decommissioning).
Indicator lamp
Connect the indicator lamp to the control cabinet if it has been removed during
transport.
Operating material
For operating material, see Chapter “Operating material“.