MP Troubleshooting
53
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
A
MP Troubleshooting
After you insert a Cat 5 cable into an MP access point’s port connector and enable
PoE on the cable, observe the device’s health LED to determine the status of the
connection with the MX switch.
●
If the health LED is green and is glowing steadily, the MP has been booted
successfully by the MX switch and is ready for operation.
●
If the health LED is not steadily glowing green, see Table 6.
(For descriptions of all the LEDs, see “Status LEDs” on page 11.)