202020
This document is intended for Public Distribution
19473 Fraser Way,
Pitt Meadows, B.C. Canada V3Y 2V4
Chapter 3: Configuration
3-20
TR-SL2 Series
Tranzeo Wireless Technologies
Bridge Mode - DHCP Client
Fallback parameters are the parameters that the radio will use if it doesn‘t receive
a response to its DHCP request.
IP Mode:
You can select to use
Static
IP or
DHCP Client
(dynamic).
Note:
If a DHCP server is not available, the
device will try to get an IP for 30 seconds after which
it will use the fallback IP address. The fallback IP is
the address that is set in the static address fields.
Re-associate
on new IP:
Radio will re-associate when it gets a new IP address.
Unless advised otherwise by Tranzeo Support staff,
this option is best left off.
Block Reverse DHCP:
Stops the device from passing DHCP offers upstream.
When enabled, if a unit is accidently plugged into the
LAN port of home router or gateway, that device‘s
DHCP offers will not be transmitted into the network.
IP Address:
Enter the IP address of the device.
Subnet Mask:
Enter the subnet mask that will be used.
Gateway:
Enter the gateway for this device to use.
DNS:
Enter the DNS servers for this device to use.
