Transvideo CineMonitorHD10 SB Evolution, Operator'S Manual

Page: 8 / 48

I
NTRODUCTION
Page 8
CineMonitor HD Evolution
The video cable must be adapted for carrying HD SDI signals. Proper 75 Ω connectors
must be used. Always check the connector before plugging a cable to your monitor.
The CineMonitorHD Evolution needs to be in a ventilated area for a proper cooling.
Prolonged use in confined environment without ventilation can damage the monitor.
IMPORTANT:
Do not use damaged cables with this equipment.
Damaged connectors may seriously damage this equipment.
Never seal the monitor in a plastic bag.
Never use the monitor in full sun with a Raincover.
Product Overview
All connectors are on the back of the monitor. Depending on the size of the monitor, the
connectors and their location may differ.
The CineMonitorHD Evolution family offers a user interface common to all sizes. Some
functions are directly accessible from the "direct functions" keypad, others from the menu
with use of the rotating knob.
The CineMonitorHD screen is partitioned in two areas:
①
The picture zone displays the picture from the camera in 16/9 format
②
The tools zone displays tools and measurements in the remaining area of the screen.
The CineMonitorHD Evolution family offers a video connector panel common to all sizes.
10" to 15" monitors also provide a power out connector and a battery plate (more details
in chapter "S
PECIFICATIONS
").
Figure 1 to 3 show the front and back of a 8" HD monitor and the back of a 10" HD
monitor.