Transvideo CineMonitorHD10 SB Evolution, Operator'S Manual, Page: 21 / 48

D
IRECT
F
UNCTIONS
Operator Manual Rev 2.0 Page 21
Input Selection (Input Sel)
Switches between video inputs.
At selection, the video standard is displayed. When no signal is detected, displays "NO
SYNC".
Sub menu allows the selection of the active inputs.
Pressing F1…F4 activates or not the selected input. An active input is highlighted in
orange, an inactive in white. An inactivated input cannot be selected by the Input Sel key.
F1: SDI (HD or SD)
F2: CVBS
F3: ACC (YPrPb or RGB or CVBS)
F4: HDMI
Inactivating the accessory input reduces the power consumption of the CineMonitorHD of
about 4 Watts.
The format of the ACC input can be configured in MENU / TECHNICAL when ACC input is
selected. It is possible to select between component YPrPb, component RGB or CVBS.
Adjust (ADJ)
Adjusts Hue (NTSC only), Brightness, Contrast and Saturation.
Select the parameter by pressing the key and adjust the value by rotating the knob.
Validate by pushing the knob.
IMPORTANT:
The settings are different for each input. All settings are stored in setup memories.
There is one memory per input. That means you can setup the ACC input differently of
the SDI input. It is useful with some specific cameras offering a viewfinder menu and a
HD SDI output.