TTi’s
OnDeck
™
HandBook
5
Call 1800 816 277
www.tti.com.au
5
Correct 12v Pump Operation:
»
Ensure correct power supply to pump, using alligator clips or 12v plug
»
Pump should begin running
»
Turn regulator knob in anti-clockwise position to reduce pressure, or unit pump
is running continuously. Liquid should be pumping back into tank
»
Turn clockwise to set correct pressure. Boom spraying should be set at approx.
3 bar. Spot spraying should be approx. 5 bar.
Note:
Sprayer must be stored in a dry place to protect pump.
Maintenance
The following steps are given as a guide to maintain your spot sprayer.
• After use, the sprayer must be thoroughly decontaminated including tank, pump,
hoses and hand lance to avoid damage to crops from harmful spray residue and
to the sprayer from corrosion or abrasion.
• After spraying, flush the tank, hose and hand lance by running it with clean
water plus a recommended cleaning fluid. It is best to clean sprayer in the field
or area just treated.
• The suction strainer attached to the pump suction line should be cleaned
periodically. Lift the strainer from the base of the tank and brush off with a soft
brush.
• Nozzle filters (if fitted), nozzle tips, nozzle caps and gaskets should be cleaned
by soaking in water, brushing with a nozzle brush and allowed to dry. Never blow
through nozzles with your mouth, nor use wire or pins to clear any blockages.
• Unscrew the hand lance grip and remove the filter screen and clean in the same
way as described for the suction strainer. Ensure that the o-rings do not become
displaced during cleaning. Reassemble the hand lance correctly.
• Align the filter screen in the handle body before the hand lance grip is screwed
back.
• When storing your spot sprayer ensure that it is clean and dry and kept in a well
ventilated place.
•
OnDeck
™
- 12v Sprayer
The Ultimate UTV Sprayer
