INSTALLATION MANUAL
iGAZER45P
Polarized Photo Eyes
FEATURES:
• Range 45-50 feet
• Immune to external light sources
• High degree of protection
• Optional cable entry
• Terminal compartment
• Polarisation filter optical system
• Test input
• Operating voltage 10-40VDC or 24VAC ±25%
• Protected against power supply polarity reversal
• Relay output
• Easy adjustment of the optical sensor
• Dirt indicator
• LED alignment indication
TECHNICAL DATA
1-3/4”
3-3/8”
1-1/2”
1”
Operating voltage
10...40VDC
24VAC,
±
25%
Operational
<100ms after power on
Current consumption max. 30mA/24V
Type of light
red, 680nm
pulsed,
polarised
Aperture angle
approx. 1.5° total angle
Output
relay, changeover contact
Switch rating
min. 1mA/min. 5VDC
max.
0.6A/50V
AC
max.
0.5A/48VDC
(resistive
load)
Response time
<10ms, detection of light
beam
interruption
Relay delay
when the light beam is
uninterrupted again, the relay
picks up with 100ms delay
Type of switching
responsive to brightness, i.e.
the relay picks up when the
light beam is uninterrupted
Ranges
45-50 feet
Indications
dual LED r ed/green
Light beam interrupted = lights up r ed
Light beam uninterrupted, spare critical function capacity.
= flashes red at 4Hz
Light beam uninterrupted, high spare function capacity.
= lights up green
Additional function
test input
(when 0V at terminal 1 the
transmitter
switches
off)
Type of connection
screw terminal max. 1.5mm²
Casing material
lower part: ABS-GF15%
upper part: PMMA, red
Degree of protection
IP67, to EN60529
Operating temp.
-13°...140°F
Storage temp.
-31°...176°F
Weight
approx. 2 oz
Size
3-3/8 x 1-3/4 x 1-1/2 in³ (LxWxH)
