B
ASEBALL
Q
UICK
R
EFERENCE
8
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29-1 • REV 1907.10
B
ASEBALL
C
ONFIGURATION
Shown are the most common configuration settings for high school and college (NCAA) baseball.
- CHANGE SPORT -
BASKETBALL? Y/N
NO
1 PRESS BSO? Y/N
TIMER SET#1 20_
TIMER SET#2 90_
REFERENCES:
• 2012 & 2012 NCAA Baseball Rules. ISSN 0736-5209. National
Collegiate Athletic Association.
PITCH TIMER? Y/N
CONTINUE? Y/N
SHIFT ↑8 – shortcut to edit Baseball settings.
YES – to continue editing BASEBALL settings.
YES – activates Single Press Ball Strike & Out feature which allows you to increase the
ball, strike and out values with a single press of the corresponding key.
YES – sets the use of a pitch timer (NCAA).
20 ENTER – sets 20 pitch timer to seconds (NCAA).
90 ENTER – sets 90 second time limit between innings (NCAA).
ABCDEFGHIJKLMNOP
ENT.CONFIG.NAME
ABCDEFGHIJKLMNOP
BB
BA B0 S0 O0 v
- BASEBALL -
Brd 00 Group 900
MP-70, VER.3.05
YES – to quit configuration settings, and begin to name and save configuration.
NO – to start at the beginning of configuration settings.
Create a name to save the configuration settings
.
4 – move cursor left (←).
6 – move cursor right (→).
5 – accept selected letter.
CLR – clear/erase letter.
ENTER – save the configuration name.
QUIT? Y/N
NO
BASEBALL? Y/N
YES – to start editing BASEBALL settings.
AUTO HORN? Y/N
NO – does not automatically sound the horn at the end of each period.
HOUR CLOCK? Y/N
NO – the hour clock is not used for the game.
CLOCK SET TO? 00
00 ENTER – sets zero (0) minutes for the game.
AUTO SC.TOTAL? Y
COUNT DN.CLK?Y/N
JUGS GUN? Y/N
STALKER GUN? Y/N
YES – when the score by inning increases, then the total runs automatically increase.
NO – if you prefer to manually track the total runs.
YES – selects the count down game clock.
YES – if using a Jug’s Speed Gun Model HTRCR-1K.
YES – if using a Stalker Pro II Speed Sensor.
A0261-BA2
1. Turn off the MP-70/50.
2. Press and hold ENTER key while turning on the MP-70/50, wait until
BASKETBALL? Y/N screen appears before releasing the ENTER key.
If
CONTROL LOCKED
appears, then you must first UNLOCK the control. Refer to
LOCK/UNLOCK instructions.
