P a g e
|
11
Initial Status
After powering on the device
，
it will take a few seconds to initialize the system It shows as
below:
➢
TL-9242A HD Encoder
: Module number and name
➢
P1
: Program 1;
P2
: Program 2;
P3
: Program 3;
P4
: Program 4
➢
X.XX Mbps
: indicate the current encoding bit rate of the corresponding channel.
3.2
GENERAL SETTINGS FOR MAIN MENU
By pressing
“Lock” key on the front panel, user can enter the main menu. The LCD will display
the following pages:
User can press UP/DOWN buttons to specify menu item, and then press ENTER to enter the
submenus as below:
1) Status
Press Enter to enter
“Status” and it displays the working time duration of the device. It times
upon power
Start up
…
Start OK
…
1 Status
2 Input Sets
3 TS Config
4 Network
5 Network
TL-9242A HD Encoder
P1:X.XXMbps P2: X.XXMbps
1.1 Alarm
1.2 Uptime
