Transition Networks, Inc.
MG/E-T-xxx-01 User Guide
33516 Rev. B
Page 5 of 11
Power Adapter
AC Power
1.
Connect the barrel conne
ctor of the power adapter to the media converter’s power port (located on the back panel
of the media converter).
2.
Connect the power adapter plug to AC power.
3.
Verify that the media converter is powered up by observing that the front panel LED power (PWR) indicator is lit.
DC Power
Consult the user guide for the Transition Networks SPS-2460-SA DC external power supply for powering the media
converter.
Operation
Status LEDs
Use the status LEDs to monitor the M/GE-T-xxx-01 media converter operation in the network.
Power Indicator LED
Pwr
LED:
Green
–
ON for power applied to board
Ethernet RJ-45 LEDs
(Left) Fiber Port LED
ON
–
ON for Link (
fiber
)
Blinking
–
Activity
(Right) TP Port LED
ON
–
ON for Link (
copper
)
Blinking
–
Activity