Transition Networks, Inc.
M/GE-T-xxx-01 User Guide
33516 Rev. B
Page 4 of 11
Connect the Twisted-pair Copper Cable
The AutoCross feature allows either MDI (straight-through) or MDI-X (crossover) cable connections to be configured
automatically, according to network conditions.
1. Lo
cate or build IEEE 803.2™ compliant 10/100/1000Base
-T cables with RJ-45 connectors installed at both ends.
2. Connect the RJ-45 connector at one end of the cable to the RJ-45 port on the M/GE-T-xxx-01 media converter.
3. Connect the RJ-45 connector at the other end of the cable to the RJ-45 port on the other device (switch, workstation,
etc.).
Note
: With Fiber Link Pass Through permanently enabled, the copper Link LED only lights when there is a valid fiber link
on the converter.
Power up the Media Converter
Power Supply Included:
To order the corresponding country specific power supply, add the extension from the list
below to the end of the SKU (-NA = North America, -LA = Latin America, -EU = Europe, -UK = United Kingdom, -SA =
South Africa, -JP = Japan, -OZ = Australia, -BR = Brazil).
The M/GE-T-xxx-01 media converter is powered by using a DC power adapter through the barrel connector on its rear
panel, as shown below.
M/GE-T-xxx-01 Back Panel Power