* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. (TX) = transmit, (RX) = receive
The SSEFE10xx-10x media converter is designed to be installed in pairs, where one
is the
local
media converter and the other is the
remote
. For example, a local
SSEFE1011-100 converter is connected, via fiber, to a remote SSEFE1011-100
converter.
For a
single fiber network
, a local SSEFE1029
-100
is connected, via fiber, to a
remote SSEFE1029
-101
converter.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .6
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Compliance Information . . . . . . .12
User’s Guide
SSEFE10xx-10x
Stand-Alone Media Converter
• Switchable Ethernet and Fast Ethernet
• 10 Mb/s Copper to Fiber
• 100 Mb/s Copper to Fiber
Transition Networks SSEFE10xx-10x series
Ethernet / Fast Ethernet media converter is a
10Mbps or 100Mbps switch-selectable media
converter. Both the copper and fiber links operate at the same speed setting via a
hard set with a dip switch, so the media converter operates at either 10 Mb/s
copper to fiber or 100 Mb/s copper to fiber.
Part Number
Port One -
Twisted-Pair
Copper
Port Two -
Fiber Optic
SSEFE1012-100
RJ-45, 100 m (328 ft)*
ST, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*
SSEFE1014-100
RJ-45, 100 m (328 ft)*
SC, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*
SSEFE1015-100
RJ-45, 100 m (328 ft)*
SC, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*
SSEFE1022-100
RJ-45, 100 m (328 ft)*
ST, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*
SSEFE1029-100
RJ-45, 100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single fiber, 20 km (12.4 miles)*
SSEFE1029-101
RJ-45, 100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single fiber, 20 km (12.4 miles)*
