Transition Networks
SISGM
–CHAS L2/L3 Switch User Guide
33625 Rev. B
Page
18
of
234
Note
: You can install the brackets on both sides at back of the device and mount it to the rack with
the rear panel facing outward if the space for front panel cabling is limited. Remember:
When installing the brackets on the front sides, use the four screw holes at the top and bottom.
When installing the brackets on the back sides, use the four screw holes at the top and middle.
The brackets are designed with 1/2U and 1U space above and below the switch; the total height
will be 2U and 3U respectively.
Bracket Ear, Left
– 1U
Bracket Ear, Right
– 1U
Bracket Ear, Left
– 2U
Bracket Ear, Right
– 2U
