Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 541 of 669
Buttons
Activate Alternate Image
: Click to use the alternate image. This button may be disabled depending on
system state.
Cancel
: Cancel activating the backup image; navigates away from this page.
Messages
Messages
:
Activate image (swap) now and reboot
Activate image (swap) manually later
Alternate image activated, now rebooting.
Alternate image activation failed.
Message
:
System config has just converted to a new format. Please backup the configuration if needed.
CLI Commands to Re-Access the Web GUI
After a Software Upload via the
Maintenance
>
Software
>
Upload
path, you can use the following CLI
commands to regain web GUI access:
#
show ip int brief
Vlan Address Method Status
---- -------------------- -------- ------
#
conf term
(config)#
int vlan 1
(config-if-vlan)#
ip addr 192.168.1.110 255.255.255.0
(config-if-vlan)#
end
#
show ip int brief
Vlan Address Method Status
---- -------------------- -------- ------
1 192.168.1.110/24 Manual UP
#
You can then access the web GUI via the IP address and netmask entered (e.g., 192.168.1.110 and
255.255.255.0 in the example above). See the S4224 CLI Reference manual for details.
