Transition Networks
S4224 Web User Guide
33558 Rev. C
Page 206 of 669
EPS Configuration
When you click on the ID of an EPS, its configuration page displays.
For example, if you click on EPS ID 2 on the screen above, the EPS ID 2 configuration screen displays:
This screen lets you configure the EPS Instance Data, Instance Configuration, and Instance Command
parameters as well as display the current Instance State.
These parameters are explained below.
EPS Instance Data
This table displays this EPS configuration instance information (EPS ID, Domain, Architecture, W Flow, P
Flow, W SF MEP, P SF MEP and APS MEP). See the descriptions above.
