Transition Networks
N-TGE-SFP-02 User Guide
33819 Rev. A
Page
4
of
22
Specifications
Standards compliance
IEEE 802.3-2008, IEEE 802.3ae, IEEE 802.3z, IEEE 802.3x, IEEE 802.3
ad, IEEE 802.1Q, IEEE 802.1p
Bus Slot
PCIe 3.0 x8
Fiber Cable
Fiber (multimode): 50/125,62.5/125μm
Fiber (single mode): 9/125μm
Data Rate (full duplex)
10 Gbps: 14,880,000 pps
1 Gbps: 1,190,476 pps
Dimensions
2.525" [64.135 mm] x 6.173" [156.79 mm] x .75" [19.05 mm]
Power Consumption
2.5W without SFP
Power Source
PCIe slot
Nominal Voltage
120/230V / 60/50Hz
Operating Temperature
0°C to +50°C
Storage Temperature
-15°C to 65°C
Altitude
0-10,000 feet
Humidity
5% to 95% (non-condensing)
Weight
0.55 lbs. (0.25 kg.)
Regulatory Compliance
EN 55024:2010
EN 55032:2012
FCC Part 15 Class B
ICES-003:2017 (ITE)
CE Mark
MTBF
to be supplied
Warranty
Limited Lifetime warranty
Note
: The supported fiber type and transmission distance depend on the SFP/SFP+ module installed in the NIC’s
SFP slot. Note that SFP and SFP+ modules are sold separately. See the Transition Networks
Note
: Only 1G SFP modules that support DMI are recognized by the NIC Intel driver.
Note
: 1G SFP modules must be installed before powering on the PC to work correctly.
Reset Signals
Any reset signal will come from the host system via the PCIe bus.
