Transition Networks
N-FX-xx-03 NIC User Guide
Troubleshooting
Diagnostics LEDs
LEDS
The LINK/ACT LED lights when a fiber cable connection is good. It blinks to indicate activity.
The collision and full-duplex LED report PC board operating status.
After power UP, the LINK/ACT LED should light; if not, check the following:
1. Confirm that the N-FX module is properly inserted into the master slot.
2. Confirm that the PC is properly connected to a power source and that the power source is turned
ON.
3. Check the fiber cable for proper connection.
4. Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600 if those steps fail to produce the
desired result.
Contact Us
Technical support
Technical support is available 24-hours a day
US and Canada: 1-800-260-1312
International: 00-1-952-941-7600
Transition now
Chat live via the Web with Transition Networks Technical Support.
Log onto
www.transition.com
and click the
Transition Now
link.
Web-based seminars
Transition Networks provides seminars via live web-based training.
Log onto
www.transition.com
and click the
Learning Center
link.
Ask a question anytime by sending an e-mail to our technical support staff at
Address
Transition Networks
10900 Red Circle Drive
Minnetonka, MN 55343, U.S.A.
telephone:
952-941-7600
toll free:
800-526-9267
fax:
952-941-2322
My TN Access
Simplify your TN experience; register a
t
http://www.transition.com/TransitionNetworks/MyTNAccess/
and become a MY TN Access registered user. You will get a more personalized experience for
registering products; Software/Firmware/Driver updates; Have access to all of our training tools,
videos, content and downloads; Technical documentation and information about support assistance;
and Receive email alerts of new products according to personal interest.
33498 Rev. B
http://www.transition.com/
Page 6 of 8
