USER’S GUIDE
J/FE-CF-03
Stand-Alone media converter
•
Fast Ethernet™
• Copper to Fiber
• 100Base-TX to 100Base-FX
Transition Networks J/FE-CF-03 Fast
Ethernet™ media converter connects 100
Mb/s twisted-pair copper cable to a duplex
100 Mb/s fiber-optic cable.
Use the J/FE-CF-03 series media converter
(or up to two media converters in series)
to extend over fiber, the distance between two 100BASE-TX devices
(hub, switch,
workstation, etc.).
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03
RJ-45, 100Base-TX
100 m
(328 ft)
*
ST, 100Base-FX, 1300 nm multimode
2 km
(1.2 miles)
*
J/FE-CF-03(SC)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC , 100Base-FX, 1300 nm multimode
2 km
(1.2 miles)
*
J/FE-CF-03(SM)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 100Base-FX, 1300 nm singlemode
20 km
(12.4 miles)
*
J/FE-CF-03(LH)
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 100Base-FX, 1300 nm singlemode
40 km
(24.9 miles)
*
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03-100
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 1310 mn TX/1550 nm RX, 20 km
(12.4 miles)
*
J/FE-CF-03-101
RJ-45, 100Base-TX
100 m
(328 ft)
*
SC, 1550 mn TX/1310 nm RX, 20 km
(12.4 miles)
*
*Typical maximum cable distance. Actual distance is dependent upon the physical
characteristics of the network installation.
Note:
Install the J/FE-CF-03-100 and the J/FE-CF-03-101 in the same network as local
and remote peers.
Installation . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . . . .6
Technical Specifications . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . .8
Contact Us . . . . . . . . . . . . . . . . . . . . .9
Compliance Information . . . . . . . . .11
Single Fiber Optic
(install as a pair)
