Transition Networks E-TBT-FRL-NLP-01 series
and E-TBT-FRL-N-01 series media converters
connect 10Base-T copper to 10Base-FL fiber.
These PCI (Peripheral Component Interconnect)
powered media converters are designed to
install directly inside a PC workstation or file
server and mount on any slot on a standard PCI.
No additional power supply is needed since the
power is drawn directly from the PCI slot.Two
LEDs integrated into the RJ-45 10Base-T port
allow for network monitoring.
The
E-TBT-FRL-NLP-01
PCI media converter (above) is
3.15”
(80mm) wide.
The
E-TBT-FRL-N-01
PCI media converter (right) is
4.76”
(121mm) wide.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .4
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . .6
Compliance Information . . . . . . . .8
User’s Guide
E-TBT-FRL-NLP-01
E-TBT-FRL-N-01
PCI Ethernet Media Converter
• Copper to Fiber
• 10Base-T to 10Base-FL
Part Number
Port One -
Copper
Port Two -
Fiber-Optic
E-TBT-FRL-NLP-01
RJ-45, 10Base-T
100 m (328 ft)*
ST, 850 nm multimode
10Base-FL, 2 km (1.2 miles)*
E-TBT-FRL-NLP-01 (SC)
RJ-45, 10Base-T
100 m (328 ft)*
SC, 850 nm multimode
10Base-FL, 2 km (1.2 miles)*
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network installation.
E-TBT-FRL-N-01
RJ-45, 10Base-T
100 m (328 ft)*
ST, 850 nm multimode
10Base-FL, 2 km (1.2 miles)*
E-TBT-FRL-N-01 (SC)
RJ-45, 10Base-T
100 m (328 ft)*
SC, 850 nm multimode
10Base-FL, 2 km (1.2 miles)*
E-TBT-FRL-N-01
E-TBT-FRL-NLP-01
The information in this user’s guide is
subject to change.For the most up-to-date
information, see the user’s guide on-line
at: www.transition.com.
