background image

Installation  . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications  . . . . . . . . . . .7
Technical Specifications  . . . . . . . .9
Fault Isolation and Correction  . .10
Contact Us  . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12

USER’S GUIDE

CFETF10xx-205

Slide-in-Module Media Converter

• Fast Ethernet™
• Copper to Fiber
• 100Base-TX to 100Base-FX

Transition Networks CFETF10xx-205 series Fast
Ethernet™ 100Base-TX to 100Base-FX Media
Converters (designed to be installed in a

PointSystem™

chassis) connect 100Base-TX twisted-

pair copper cable to multimode or singlemode
100Base-FX fiber-optic cable.

* Typical maximum cable distance.  (Actual distance is dependent upon the

physical characteristics of the network installation.)

Part Number

Port One - 

Copper

100Base-TX

Port Two - 

Fiber-Optic

100Base-FX

CFETF1011-205

RJ-45
100 m (328 ft)*

ST, 1300 nm multimode
2 km (1.2 miles)*

CFETF1013-205

RJ-45
100 m (328 ft)*

SC, 1300 nm multimode
2 km (1.2 miles)*

CFETF1014-205

RJ-45
100 m (328 ft)*

SC, 1300 nm singlemode
20 km (12.4 miles)*

CFETF1015-205

RJ-45
100 m (328 ft)*

SC, 1300 nm singlemode
40 km (24.9 miles)*

CFETF1016-205

RJ-45
100 m (328 ft)*

SC, 1310 nm singlemode
60 km (32.3 miles)*

CFETF1017-205

RJ-45
100 m (328 ft)*

SC, 1550 nm singlemode
80 km (49.7 miles)*

CFETF1018-205

RJ-45
100 m (328 ft)*

MT-RJ, 1300 nm multimode
2 km (1.2 miles)*

Summary of Contents for CFETF10 Series








Reviews: