background image

*

Typical maximum cable distance.  (Actual distance is dependent upon the
physical characteristics of the network.)  (TX) = transmit   (RX) = receive

** SBFTF1029-

150

 and SBFTF1029-

151

are intended to be installed in the same

network where one is the 

local

converter and the other is the 

remote

converter.

***  SBFTF1029-

152

 and SBFTF1029-

153

are intended to be installed in the same
network where one is the 

local

converter and the other is the 

remote

converter.

USER’S GUIDE

CBFTF10xx-15x

Slide-in-Module Media Converter

Copper to Fiber

10/100 Bridging (2-Port)

10Base-T/100Base-TX to 100Base-FX

The CBFTF10xx-15x 2-port Ethernet/Fast Ethernet
bridging Media Converter is designed to be
installed in a Transition Networks 

PointSystem™

chassis and connects 10Base-T Ethernet or
100Base-TX Fast Ethernet twisted-pair copper
network devices to network devices on a 100Base-
FX Fast Ethernet fiber network.

CBFTF1029-150

**

RJ-45
100 m (328 ft)*

SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 20 km (12.4 miles)*

CBFTF1029-151**

RJ-45
100 m (328 ft)*

SC, 1550 mn (TX)/1310 nm (RX)
singlemode, 20 km (12.4 miles)*

CBFTF1029-152*** 

RJ-45
100 m (328 ft)*

SC, 1310 mn (TX)/1550 nm (RX)
singlemode, 40 km (24.8 miles)*

CBFTF1029-153***

RJ-45
100 m (328 ft)*

SC, 1550 mn (TX)/1310 nm (RX)
singlemode, 40 km (24.8 miles)*

Part Number

Port One - 

Copper

10Base-T/100Base-TX

Port Two - 

Duplex Fiber-Optic

100Base-FX

CBFTF1011-150

RJ-45
100 m (328 ft)*

ST, 1300 nm multimode
2 km (1.2 miles)*

CBFTF1013-150

RJ-45
100 m (328 ft)*

SC, 1300 nm multimode
2 km (1.2 miles)*

CBFTF1014-150

RJ-45
100 m (328 ft)*

SC, 1310 nm singlemode
20 km (12.4 miles)*

CBFTF1015-150

RJ-45
100 m (328 ft)*

SC, 1310 nm singlemode
40 km (24.8 miles)*

CBFTF1018-150

RJ-45
100 m (328 ft)*

MT-RJ, 1300 nm multimode
2 km (1.2 miles)*

Installation  . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications  . . . . . . . . . . .8
Technical Specifications  . . . . . . . .9
Fault Isolation and Correction  . .10
Compliance Information . . . . . . .12

Summary of Contents for CBFTF10XX-15X








Reviews: