Transition Networks
S4110 Install Guide
33573 Rev. B
Page 2 of 20
Introduction
Transition Networks’ two-port S4110 series is a 10 Gbps Fiber-to-Fiber Converter supporting data rates
from 1G to 11.5G bps; this fiber-to fiber port converter has two SFP+ slots and performs full 3R (re-
amplify, re-shape, and re-timing) signal regeneration. It can be used all alone or it can be connected to
another x4110, providing fiber-to-fiber conversion in the following user networks
:
•
10G LAN, 10G WAN
•
10G Fiber Channel
•
SONET OC192
•
10G OTN (G.709)
The S4110 can be used in telecom and enterprise applications where 10 Gbps links require fiber
extension or where 10 Gbps links require an interface between two differnet types of fiber. The S4110
performs a wide variety of protocol transparent service; it supports virtually any protocol from 1 Gbps to
11.5 Gbps:
•
10G LAN (10.3125 Gbps) / WAN (9.95 Gbps)
•
SONET OC-192/SDH STM-64 at 9.95 Gbps
•
10G Fiber Channel at 10.52 Gbps
•
1/2/4/8 Gbps Fiber channel
•
OTU2 at 10.709 Gbps
•
OTU1e at 11.05 Gbps
•
OTU1f at 11.27 Gbps
•
OTU2e at 11.09 Gbps
•
OTU2f at 11.32 Gbps
•
SONET OC-48/SDH STM-16 at 2.40 Gbps
•
Legacy 1G Ethernet at 1.25 Gbps
•
Any other rate from 1 - 11.5 Gbps
Models
The S4110 is an ION Stand-alone device. The C4110 is an ION chassis slide-in-card.
The S4110 is used as remote device when linked back to a managed chassis card.
The C4110 SIC card can be managed by ION Web, ION CLI, or Focal Point 3.0. The S4110 can not be
remotely managed.
Manageable C4110 features are available when used in an ION Platform chassis along with an ION
Management Module (IONMM). The x4110 is delivered with a default configuration. You can change the
configuration via the ION Web interface, Focal Point 3.0, and the ION CLI.
Model
Fiber
Connections
Rates
S4110-4848
SFP/SFP+
1-11.5Gbps
C4110-4848
SFP/SFP+
1-11.5Gbps
