CONGLOMKB .COM
Please contact
cs@conglomkb .com
or
1-877-333-0098
for further assistance .
ENGLISH
5
Installation
FAUCET INSTALLATION
-
Remove the gasket (3), metal washer (4), and retaining nut (5) from the faucet shank.
-
If you are installing this faucet onto a 3 hole sink, replace the faucet base (2) with the base
O-ring (D) and use the decorative cover plate (C) to cover the extra faucet holes. Otherwise skip
this step .
- Feed the faucet hoses through the faucet mounting hole .
Base
O-ring (D)
Cover
Plate (C)
Sink
3-Hole Sink Installation
1-Hole Sink Installation
Faucet
Base (2)
Sink
Fig . 1
- Secure the faucet to the sink with the
gasket (3), metal washer (4), and retaining
nut (5) from underneath.
-
Tighten the retaining nut (5) by hand until it
is snug. Gently tighten the two screws (6) in
the retaining nut . Do not overtighten .
Sink
Gasket (3)
Retaining Nut (5)
Metal Washer (4)
Screws (6)
Fig . 2
