File name: Documento1
Last modify: 2021-04-16
Document Ref: MDTECH001
Page 5 of 8
Preparing the assembly
Cut the GOMAX QUADRA capillary hose to the required
length using Transfer Oil cutter for capillary hoses type
WXA004. If you wish to use another method of cutting it is
important that the cut is perpendicular (90° angle with a
tolerance of 5%)
We recommended the use of the cutter WXA004.
Assembling the ferrule and the insert
Slip the nut over the hose (depending on fitting type).
Ensure that the threaded side is pointing towards the end
of the hose that needs assembling.
Slip the ferrule over the hose end, ensure correct
positioning, in line with the hose end (due to the design it
can be only be mounted in one way).
Push the insert into the hose end you want to assemble.
Assemble/put the insert together with the nut onto the hose
end.