Transduction TR-LCD2300W, User Manual, Page: 19 / 34

19 TR-LCD2300W User Manual
Quick Start
**Warning: Never attach monitor to computer with the power ON as it might damage
video port.
To attach the TR-LCD2300W monitor to your computer, follow the instructions below:
1. Turn OFF the power to your computer.
2. Plug the power cord for the monitor into nearby outlet.
3.
Option 1:
Connect the DVI cable to the DVI port on the back of the monitor.
4. Option 2: Connect the SVGA cable to the SVGA port on the back of the monitor.
5. Connect the other end of the cable to either DVI or SVGA port (as applicable) on the
computer.
6. Turn ON the computer and monitor. If the monitor displays an image, installation is
complete.
Notes:
• If the monitor is connected properly but you get a blank or fuzzy screen, check to
see if monitor status is set to analog. Press the ENTER button to have the
monitor verify the input signal source.