Transduction TR-LCD2300W-V2, User Manual

Page: 13 / 38

13 TR-LCD2300W-V2 User Manual
Quick Start
**Warning:
Never attach monitor to computer with the power ON as it might damage
video port.
To attach the TR-LCD2300W-V2 monitor to your computer, follow the instructions
below:
1. Turn OFF the power to your computer.
2. Plug the power cord for the monitor into nearby outlet.
3. Video connection options on the monitor:
3.1. Option 1: connect the SVGA to SVGA cable – SVGA on the back of the monitor
and SVGA on the computer.
3.2. Option 2: connect the DVI to DVI cable – DVI on the back of the monitor and DVI
on the computer.
3.3. Option 3: connect the DisplayPort to DisplayPort cable to the DisplayPort on the
back of the monitor and computer.
4. Turn ON the computer and monitor. If the monitor displays an image, installation is
complete.
Notes:
•
If the monitor is connected properly but you get a blank or fuzzy screen, check to
see if monitor status is set to analog. Press the SOURCE key to have the
monitor verify the input signal source.